VANS Gyplast is a pure gypsum based plaster suitable for most internal wall and partition surfaces including brick, block and concrete. It consists essentially of pure gypsum hemihydrate formulated with special additives to control application and setting characteristics. It contains pure gypsum in natural form, eliminated from all impurities. It gives plaster an unmatched work-ability because of its smoothness, coverage and ease of application. When dried it provides a super white, smooth and fine finish.
Why Choose Gyplast?
Pure Gypsum Green Product
Ultra White And Ultra Smooth
Excellent Strength On Drying
- Single coat application. Can be directly applied
- High coverage up to 92 m2/t
- Enhanced light refection, imparting true color tone and gloss for paint
- Compatible with any type of paint.
- Mixing Ration – 1:1.25 Water and Gypsum Powder by volume
- Thickness can go up to 32mm for walls and 10mm for ceilings
- 12 months shelf life.
- Crack free
- No powdering
- Fungus free
- Fire resistant
- Thermal resistance
VANS Gyplast Compatibility
VANS Gyplast can be applied directly on all the Hard Surfaces as shown below.
Recommended Application Methodology
Prepare Wall Surface
The wall surface should be thoroughly clean before applying Vans Gyplast
Wetting Wall Surface
Pre-wet the substance before applying VANS Gyplast
Mix VANS Gyplast
Mix VANS Gyplast in water. Water to plaster ratio should be (1:125)
Apply VANS Gyplast
Apply mixed plaster on the substrate and level it with an aluminium bottom scale.
Product Comparison Chart
Safety Instruction: VANS Gyplast is absolutely free from any lime or toxic elements. In case it comes in contact with the eyes or live wound, please wash away with fresh normal water. Consult doctor if irritation continues.